What is a inkjet glass printing Primer? 

Nanovations N-Bond UV Inkjet Primer is much more.

Nanovations will showcase its latest nanotech surface modifications for the glass industry in the Innovative Product Pavilion at GlassBuild America 2014 expo in Las Vegas, Nevada on September 9th – 11th.

Nanovations N-Bond-UV-Primer is the latest technologies that enable UV curable inkjet inks to obtain superior adhesion on difficult-to adhere surfaces, such as glass and ceramics, Acrylic and certain metals. 
So , what is a Inkjet primer? 
The N-Bond Primer ensures that the print ink or paint layer adheres effectively to the non-porous surfaces of these materials by promoting molecular adhesion.  

As a primer, it is applied to the substrate before the print process. In this case, N-Bond-UV-Primer is in the optimum position (in the interphase region between substrate and ink resin), where it can be most
effective as an adhesion promoter. With N-Bond-UV-Primer, a poorly adhering ink, can be converted to a material that often will maintain adhesion even if subjected to severe environmental conditions.

To do so N-Bond is bonding to selected substrate molecules and the final result is less than 100 Nm thick and completely invisible  . 

Such a thin layer , enables N-Bond to use the lowest product consumption and therefore has the highest coverage rate of any product on the market. 

Up to 400 m2  or 4,400 sq. ft.  of glass  can be primed with one single litre of product.  

This makes N-Bond Primer the most cost effective solution available world wide. 

Summery of Product Features & Specifications

• Developed especially for UV – ink and glass
• Can be used on Acrylic , Aluminium , Composites  , Glazed Ceramics, polished stones etc. 
• Ultra-thin , true nano-scale final layer 
• Cures at room temperature without additional UV 
• For durable moisture and water resistant ink layers
• Fast cross linking with the substrate. 10 min or less. 
• Permanent bond
• Mono-layer technology – not film building 
• Reduced need for chemicals to prepare glass 
• Simple spray and wipe on application 
• Streak free, crystal clear finish
• 3 year shelf life – from date of order arrival. 
• low odour , not toxic and not corrosive . 
• lowest cost per m2 / sq. ft of any primer product world wide.
• Developed and Made in Australia by Nanovations 2014  
• 100 % Quality as produced from 99% Australian made raw materials. 
• Recommended by leading printer Canon , Roland , Agfa , Konica HP etc. 
• Can be used with Latex ink.